Products
-
3/8"-16 Stainless Steel Finished Hex Nut (Pack of 100)
$30.00Dial/Thread Size 3/8"-16 Finish Plain Material Stainless Steel Thread Coarse Type Hex Nut Quantity: 100
$30.00 -
3/8" Stainless Steel Flat Washer (Pack of 100)
$15.00Bolt Size 3/8" Finish Plain Material Stainless Steel Quantity: 100
$15.00 -
3/8" Stainless Steel Lock Washer (Pack of 100)
$20.00Finish Plain Material Stainless Steel Nominal Size 3/8" Quantity: 100
$20.00 -
3/8" Stainless Threaded Rod 3/8"x6'
$26.003/8" Stainless Threaded Rod Diameter: 3/8" Length: 6 Foot Long
$26.00 -
Strut Angle Corner Bracket 4-Hole
$5.00Strut 90* Angle Corner Bracket 4-Hole Standard for 1 5/8" Strut (4) 9/16" Holes Carbon Steel, Galvanized Finish
$5.00 -
1/2" Galvanized Threaded Rod 1/2"x6'
$30.001/2" Galvanized Threaded Rod Diameter: 1/2" Length: 6 Foot Long * ITEM REQUIRES SPECIAL SHIPPING IF NOT IN THE TRI-STATE AREA. PLEASE CONTACT US ...
View full details$30.00 -
1/2" - 13 Galvanized Hex Nut (Pack of 100)
$30.00Hot Dip Galvanized Thread Coarse Type Hex Nut Quantity: 100
$30.00Sold out -
1/2" Galvanized Flat Washer (Pack of 100)
$15.00Bolt Size 1/2" Finish Galvanized Steel Quantity: 100
$15.00 -
5/8" Galvanized Threaded Rod 5/8"x 6'
$50.005/8" Galvanized Threaded Rod Diameter: 5/8" Length: 6 Foot Long * ITEM REQUIRES SPECIAL SHIPPING IF NOT IN THE TRI-STATE AREA. PLEASE CONTACT US ...
View full details$50.00 -
Pipe to Pipe Clamp (1-1/2” to 3-1/2” OD) Light Duty
$74.00Pipe to Pipe Clamp (1-1/2” to 3-1/2” OD) Light Duty Hot Dipped Galv Comes with Four 10" Threaded Rods Comes with 1/2" Hardware *Clamps are smaller...
View full details$74.00 -
Pipe to Pipe Clamp (1-1/2” to 3-1/2” OD) Heavy Duty
$84.00Pipe to Pipe Clamp (1-1/2” to 3-1/2” OD) Heavy Duty Hot Dipped Galv Comes with Four 10" Threaded Rods Comes with 1/2" Hardware
$84.00 -
2 1/2" x 4 1/2" U-Bolt w/ Hardware
$4.00Measurements Inside Dimensions: 2 1/2" Threads: 2 7/8" Long Total Length: 4 3/4" Hardware Included
$4.00 -
2 7/8" x 5" U-Bolt w/ Hardware
$4.50Measurements Inside Dimensions: 2 7/8" Threads: 2 7/8" Long Total Length: 5" 1/2"Hardware Included
$4.50 -
3" x 5 1/4" U-Bolt w/ Hardware
$5.00Measurements Inside Dimensions: 3" Threads: 2 1/2" Long Total Length: 5 1/4" Hardware Included
$5.00 -
Crossover Plate Kits 2-3/8'' - 2-3/8''
$44.00Crossover Plate Kits 2-3/8'' - 2-3/8'' Comes with (1) Slotted Crossover Plate 2-3/8'' - 2-3/8'' Comes with (2) 2 1/2" U Bolts Comes with (2) ...
View full details$44.00Sold out -
Crossover Plate Kits 2-3/8'' - 3-1/2''
$52.00Crossover Plate Kits Comes with (1) Slotted Crossover Plate 2-3/8'' - 3-1/2'' Comes with (2) 2 1/2" U Bolts Comes with (2) 3 1/2" U Bolts
$52.00 -
Crossover Plate Kits 2-3/8'' - 4-1/2''
$55.00Crossover Plate Kits Comes with (1) Slotted Crossover Plate 2-3/8'' - 4-1/2'' Comes with (2) 2 1/2" U Bolts Comes with (2) 4 1/2" U Bolts
$55.00 -
3/4" Greenfield Straight Squeeze Connector UL
$1.753/4" Greenfield Straight Squeeze Connector 3/4" Connector Straight Connector Metallic UL Listed Paired with 3/4" Greenfield
$1.75 -
3/4" Greenfield 90* Squeeze Connector UL
$3.003/4" Greenfield 90* Squeeze Connector 3/4" Connector 90* Squeeze Type Metallic UL Listed Paired with 3/4" Greenfield
$3.00 -
3/4" Greenfield Flexible Conduit UL (100' Coil)
$135.003/4" Greenfield Flexible Conduit 3/4" Greenfield 100' Coil Metallic Flexible Conduit UL Listed Paired with Straight & 90* Squeeze Connectors
$135.00 -
3/4" Straight Malleable Iron Seal Tight Connector UL
$9.003/4" Straight Seal Tight Connector Straight Type Connector Malleable Iron Insulated UL Listed Pairs with Metallic Seal Tight
$9.00 -
3/4" 90* Malleable Seal Tight Connector UL
$11.003/4" 90* Malleable Seal Tight Connector 90* Degree Type Connector Malleable Iron Insulated UL Listed Pairs with Metallic Seal Tight
$11.00 -
3/4" Metallic Seal Tight UL Listed (100' Roll)
$275.003/4" Metallic Seal Tight 3/4" Metallic Gray Color 100' Coil Indoor/Outdoor Rated Resists (Corrosion, Abrasion, Oil, Water) UL Listed
$275.00